DC Super Shine Ultimate Performance Standard Kit
The D C Super Shine Ultimate Performance Heavy Cut Polishing Kit is the latest development in our pursuit of excellence when it comes to polishing aluminum. This kit offers high quality Infinish 20 ply fast cut buffing wheels for the cutting phase of polishing. These buffing wheels are without centers, thus allowing us to employ a 4.5” quick center, self-centering flange set. The outside disc in this flange set design is threaded, thus eliminating the need for a washer and nut for the polisher arbor; and in most instances this system solves the problem of working with an arbor that is too short to accommodate the buffing wheel and flange set. The performance of the combination of high quality 20 ply fast cut buffing wheels and the quick center flange set is extremely smooth and reliable. No tools are required for this set up, and we are especially pleased that the 4.5” flange set entirely covers the entire clinch ring. When hand tightened, the flanges put pressure upon the clinch ring thus providing increased protection against the possibility of buffing wheel material coming loose from the clinch ring.
The new D C Super Shine Ultimate Performance Aluminum Polishing Kit also contains two distinct metal polishes. The first polish, Flash Green, is to be used in those areas where you cannot reach with your polisher and thus hand work is required. The second polish in the kit, Flash Blue, is a very fine finishing polish that will enhance luster and add protection to your work. The combination of these polishes satisfies both the need for a cutting polish as well as a finishing polish with protective qualities.
The D C Super Shine Ultimate Performance Aluminum Polishing Kit contains the following items:
2 10” 20 Ply Layered Airway Buffing Wheels (without centers)
1 10” 16 ply Soft White Finish Airway Buffing Wheel (without center)
1 Menzerna Brown Rouge Bar (Standard Cut)
1 Menzerna Blue Final Finish Rouge Bar
1 Aluminum Quickcenter, Self-Centering Safety Flange Set
1 Buffing Wheel Cleaning Rake
1 Bottle (16 oz.) Flash Green (Medium Cut) Metal Polish
1 Bottle (16 oz.) Flash Blue (Final Finish) Metal Polish
(note: you will need a polisher with a 5/8" arbor shaft in order to use this kit. otherwise, see adapters under "zephyr buffing products." the arbor shaft of the polisher must be at least 3/4" in length. one inch is preferable in order to have the buffing wheel far enough away from the polisher. if the shaft is less than one inch we recommend purchasing the 2" extender kit found on page one under "tools". this handy accessory moves the buffing wheel 2" away from the polisher. important: always wear a face shield or safety goggles when using this kit to polish aluminum. pay attention to manufacturer
**Typically ships within 1-3 days when in stock. Please allow up to 10-15 business days for Delivery for certain locations. Thank you!
Important: Always wear a face shield or safety goggles when using this kit to polish aluminum. Pay attention to manufacturer recommendations. The buffing wheels in this kit are rated for a maximum 3400 rpms. While some polishers may choose to polish at higher rpms, it is important to note the recommended limits. Exceeding the recommended rpm rating can cause serious injury.